Tannery Wastewater Treatment Chemical , CW -08 Colour Removing
Colorless or light-color sticky liquid
Specific Gravity at 20°C
PH Value (30% Solution)
Soluble in Water absolutely
free sample for you
Can remove color also can reduce COD
Strong decolorization (85-95%)
Faster sedimentation, better flocculation
NO aluminum, chlorine, heavy metal ions,etc
1. It is mainly used for waste water treatment for textile,
printing, dyeing, paper-making, mining, ink, and so on.
2. It can be used for color removal treatment for high-colority
waste water from dyestuffs plants. It is suitable to treat waste
water with activated, acidic and disperse dyestuffs.
1. The product shall be diluted with 10-40 times water and then
dosed into the waste water directly. After being mixed for several
minutes, it can be precipitated or air-floated to become clear
2. The pH value of the waste water should be adjusted to 7~8 for
3. When the colority and CODcr are relatively high, it can be used
with the help of polyaluminum chloride(PAC), but not mixed
together. In this way, the treatment cost can be lower. Whether
polyaluminum chloride is used earlier or afterwards depends on the
flocculation test and the treatment process.
Package and Storage:
1.It is harmless, non-flammable and non-explosive, it can not be
placed in the sun.
2. It is packed in plastic drums with each containing 30kg, 50kg,
250kg , 1000kg, 1250kg IBC tank or others according to your
requirements; One container could load 20~23 tons.
3. This product will appear layer after a long-term storage