Cationic polyacrylamide polymer , Dye water treatment , Liquid
|Appearance||white fine-sand shaped powder|
|PH value(1% water solution)||4.0~7.0|
|Solid content %||90|
|Note: our product can be made upon your special request.|
This product is a water-soluble high polymer with good flocculation
ability.It can reduce the friction resistance between liquid.It is
not soluble in most organic solvents.
free sample for you
1. It is mainly used for the sludge dewatering and decrease the
rate of water content of sludge.
2. It can be used to treat industrial wastewater and domestic
3. It can be used for papermaking to improve dry and wet strengrh
of paper and to increase the reservation of tiny fibers and
1. It should be diluted to the concentration of 0.1%(based on solid
content).It is better to use neutral or desalted water.
2. When making up solution,the product should be scattered evenly
in the stirring water,usually the the temperature is between
3.The most economical dosage is based on the trial.
Package and Storage:
1,The solid product can be packed in inner plastic bags,and further
in polypropylene woven bags with each bag containing 25KG.
2,The emulsion product can be packed in plastic drum,each drum
containing 50kg or 200kg.
Should be sealed and stored in a dry and cool place below 35℃.
Our products with strong capacities of decolorization and removal
of COD,BOD. They are mainly used for waste water treatment of textile,
dyeing, paper-making, printing, mining, ink and so on. In addition,
our flocculant agent also can be used as retention agent in the
production of paper & pulp.