CW 05 Series paper color removal cationic polyacrylamide for
chemical , Flocculant Agent
Dicyandiamide formaldehyde CW-05 resin for Pigment waste water treatment.
colorless or light-color sticky liquid
more than 50%
Specific Gravity at 20°C:
PH Value (30% water Solution):
Dissolve in Water absolutely
Packed with 25kgs / 250kgs / 1250kgs drum
Room temperature , for a long-term storage
2,experience since 1985
3,free sample for you
4, Can remove color also can reduce COD
5,Strong decolorization (85-95%)
6, Faster sedimentation, better flocculation
7,NO aluminum, chlorine, heavy metal ions,etc
1. It is mainly used for waste water treatment for textile,
printing, dyeing, paper-making, mining, ink, and so on.
2. It can be used for color removal treatment for high-colority
waste water from dyestuffs plants. It is suitable to treat waste
water with activated, acidic and disperse dyestuffs.
1. The product shall be diluted with 10-40 times water and then
dosed into the waste water directly.
After several minutes, it can be precipitated or air-floated to get clear water.
2. The pH of the waste water should be adjusted to 6-10 for better
3. polyaluminum chloride, but not mixed together. In this way, the
treatment cost can be lower. Whether polyaluminum chloride used
earlier or later depends on the flocculation test and the treatment
Package and Storage:
1.It is harmless, non-flammable and non-explosive, it can not be
placed in the sun.
2. It is packed in plastic drums with each containing 30kg, 50kg,
250kg , 1000kg, 1250kg IBC tank or others according to your
requirements; One container could load 20~23 tons.
3. This product will appear layer after a long-term storage